Filter
Our Products
including Archiv • Page: 65
1.7.7 | AX10466 | Ethernet IEEE802.3 PC/104 module 10Base-5T | phased out | |
1.7.7 | AX10465 | Ethernet IEEE802.3 PC/104 module | phased out | |
1.7.7 | AX10462 | ISA AT bus Card with 2*PC/104 connector | phased out | |
1.7.7 | AX10461 | ISA AT bus Card with 1*PC/104 connector 180*132mm | use ICOP-0091 | |
1.7.7 | AX10460 | Module PC/104 breadboard for custom use with solder contacts | phased out | |
1.7.7 | AX10455 | 8 Relay actuator PC/104 module, LEDs indicators | phased out | |
1.7.7 | AX10450 | PC/104 16 opto-isolated (max 1KV) digital inputs 5-24V | phased out | |
1.7.7 | AX10445B+ | 2 independent RS422 or RS485 PC/104 module | phased out | |
1.7.7 | AX10445A+ | 2 independent RS422 or RS485 PC/104 module, isolated | phased out | |
1.7.7 | AX10440E | PC/104 IC memory Cards PCMCIA V2.0 / JEIDA V4.1 | phased out | |
1.7.7 | AX10440A | PC/104 IC memory Cards PCMCIA V2.0 / JEIDA V4.1 standard | phased out | |
1.7.7 | AX10436/32 | Flash disk PC/104 module, 32MB capacity | phased out | |
1.7.7 | AX10435 | Dual drive Flash/EPROM/SRAM disk PC/104 module | phased out | |
1.7.7 | AX10431 | Flat panel LCD and CRT PC/104 module | phased out | |
1.7.7 | AX10430 | Super VGA display controller PC/104 module, 1MB RAM | phased out | |
1.7.7 | AX10425/10 | 10 channel counter/timer PC/104 module | phased out | |
1.7.7 | AX10425/5 | 5 channel counter/timer PC/104 module | phased out | |
1.7.7 | AX10424 | PC/104 24 bit IO TTL module 3 chan counter/timer | phased out | |
1.7.7 | AX10420 | 48 bit digital IO TTL PC/104 module, opto-22 compatible | phased out | |
1.7.7 | AX10416 | 4 DA converter PC/104 module, 12 bit output: 0-5V or 4..20mA | phased out | |
1.7.7 | AX10415 | 2 DA converter PC/104 module, 12 Bit output | phased out | |
1.7.7 | AX10412 | AD-converter isolated PC/104 module, 16SE, 16/12bit, 8/8 DIO | EOL, call for remaining quantity | |
1.7.7 | AX10411 | AD-converter PC/104 module, 12,5KHz 16SE 12 Bit, 8/8 TTL-IO | phased out | |
1.7.7 | AX10410A | AD-converter PC/104 module 100KHz 2 DA 8 TTL DIO | phased out | |
1.7.7 | AX10402 | PC/104 CPU module, low power M6117C single chip, 2MB DRAM | phased out | |
1.7.7 | AX10405 | PC/104, 2ser, 1par, 1 game, 2 IDE HDD, 2 FDD, watchdog | phased out | |
1.7.7 | AX10401/A2 | CPU PC/104 Card module, low power 386/40MHz CPU, 4MB DRAM | phased out | |
1.7.7 | AX10401/A1 | CPU PC/104 Card module, low power 386/40MHz CPU, 2MB DRAM | phased out | |
1.7.7 | IPC-B2004SI | PC/104+ 4*RS422/485 isolated professional Card | call | |
1.7.7 | IPC-B2004 | PC/104+ 4*RS422/485 professional Card | call | |
1.7.7 | IPC-B2002SI | PC/104+ 2*RS422/485 isolated professional Card | call | |
1.7.7 | IPC-B2002 | PC/104+ 2*RS422/485 professional Card | call | |
1.7.7 | PCM-2855+ | PC/104+ isolated 4*RS485 module | Request a quote Quotation: PCM-2855+ | |
1.7.7 | PCM-7250+ | PC/104+ 8 Relay module | Request a quote Quotation: PCM-7250+ | |
1.7.7 | PCM-6308V+ | PC/104+ isolated 8chan 12bit DA module | phased out | |
1.7.7 | PCM-9112+ | PC/104+ AD 12bit 110kHz 16chan module | phased out | |
1.7.7 | EBC-1200 | Embedded 3,5'' board VGA LAN PC104+ | phased out | |
7.1.1 | MBPCS8L | PC Slotblech 8x 4pol Lemosabuchsen + Flachbandkabelanschluss | call | |
7.1.1 | MBPC8 | PC mounting panel for 1-8 signal conditioning modules MDxx | call | |
7.1.1 | MBPC5Fxx | Frontplatte und 8x Basisplatine für 5.25'' PC-Frontschacht | call | |
7.1.1 | MBPC3Fxx | Frontplatte und 8x Basisplatine für 3.5'' PC-Frontschacht | call | |
7.1.1 | MBPCS4B | PC Slotblech mit 4x BNC Buchsen + Flachbandkabelanschluss | call | |
7.1.1 | MBPCS4P | PC Slotblech 4x 4pol Klemmsteckern + Flachbandkabelanschluss | call | |
7.1.1 | MBPCS4T | PC Slotblech mit 4 Thermosteckern + Flachbandkabelanschluss | call | |
7.1.1 | MBPCS4L | PC Slotblech 4x 4pol Lemosabuchsen + Flachbandkabelanschluss | call | |
7.1.1 | MBK37CT | Adapter cable for Contec Cards | call | |
7.1.1 | MBK37AX | Adapter cable for Axiom Cards | call | |
7.1.1 | MBK37AV | Adapter cable DB37 to 50pin for ADLink and Advantech Cards | call | |
7.1.1 | MBK37AD | Adapter cable DB37 to DB37 for ADLink and Advantech Cards | call | |
7.1.1 | MBPC16 | PC mounting panel for 1-16 signal conditioning modules MDxx | call |
There are no categories here at the moment.
acceed news
Under the brand name ExpertDAQ, Acceed offers a comprehensive range of scalable and cost-efficient IO modules, for example the EX9200 series. The modules with analogue and digital inputs and outputs also serve to link distributed sensors, actuators, meters or relays in extensive areas or via the Internet. They are robust, energy-efficient and can be installed and commissioned without any great effort. The EX9250-MTCP is a digital I/O module with ten inputs and six outputs. Two Ethernet interfaces enable the linking of several modules. Here, the auto-bypass function ensures the further operation of the other modules in the chain if one fails.
Due to its nature, the outdoor area poses a challenge for the network infrastructure. Wireless access points and routers are also no exception to this rule. Although wireless ranges are higher than in buildings, the requirements of resistance to weathering, temperature tolerance, robustness and security are also higher. Whether an industrial estate or office campus, transport fleet, repository or agricultural sector, the needs for comprehensive WLAN are constantly growing. WLAN which is stable, secure and designed for high access rates plays an important role for data communication in virtually all business fields. With the new WDAP-1800AX and WDAP-3000AX from Planet, Acceed from Düsseldorf, Germany, has extended its programme with two cost-efficient dual outdoor access points which are tailored to these requirements with Wi-Fi 6, IP67, a wide temperature range, PoE, the latest security protocols and OFDMA.
In times of AI, Industry 4.0, Big Data, Deep Learning and further algorithm-based technologies, it sounds almost anachronistic if we refer to I/O modules, that is to say hardware classics. However, this assessment is not fully correct. Rather the opposite: the relevance and advantages of I/O architectures are also still apparent nowadays and are undeniable − even if the term is losing its attractiveness. Therefore, the German distributor Acceed also still banks on the globally used hardware from the experienced manufacturer TOPSCCC (founded in 1987) and its ExpertDAQ brand within its the professional network technology portfolio.
The use of computers within an industrial environment, specifically outdoors, under high temperatures or under the influence of vibration, wetness, dust and similar aggressive environmental factors can pose a great challenge. The German distributor Acceed has now added the model Nuvo-9650AWP to its programme, a cost-efficient IP66 controller precisely tailored to these requirements. Moreover, various options and extension opportunities allow targeted configuration and adaptation to specific use scenarios.
Vehicles which are used for industrial purposes, whether transport, warehouse logistics or further tasks, are increasingly developing as moving computers. Their performance is becoming increasingly dependent on the functions of the computer systems used and their peripherals, such as cameras and further sensors. Internal vehicle applications range from vehicle fleet management to navigation and monitoring, all of which are important functions which nobody wishes to relinquish nowadays. The German distributor Acceed offers the new series of compact industrial AI platforms with the name NRU-51V+ for this purpose. The robust and fanless controllers for GMSL2 cameras are tailored precisely to these tasks with their Nvidia high-performance type Jetson Orin or Xavier modules.